Liquid Rubber for Effective RV Leaks Repair

If you love traveling the open road and sleeping in an RV instead of a hotel, you will want to maintain it properly so that you can get the most enjoyment from vacationing close to nature.

The RV Roof Repair Process

When you are ready to do RV leaks repair on your getaway vehicle, you’ll need to clean and wash it off fully. Brush any accumulations of dirt from the area where you will be doing repairs. Clean any oxidation from the surface of the roof. For smaller repairs to roofing that is made with EPDM membrane, use a solvent and rag and scrub any areas you want to repair. You may find extra fine pads to be helpful in this respect. You want a fresh, clean surface before you start your repairs.
If the area you are repairing is larger, you may want to use a power washer and then scrub aggressively with a stiff broom, to get to the roof itself. You should apply the EPDM primer on RV leaks repair areas as instructed on the product packaging.
Dry your trailer roof as well as you can, using a hand brush to push water away from lower roof areas. Use the brush briskly and then use a hand towel to make sure you have all the water off.
As you dry the roof, be sure to remove any old patching material and debris. Old tar will often lift or flake right off. A flat head screwdriver or scraper will help to loosen any patching material or tar that needs to come off, states DIY World.
Liquid rubber membrane is among the best materials available for RV leaks repair. It will seep into crevices and cracks, and it bonds with the material of the roof, to create a strong seal. It will give you years of leak-free service.
Using an old metal trowel or paintbrush, spread a very even coat over all the seams of the RV roof. Cover the area around the seams at least an inch further than the seam. Use the membrane to seal around all antennas, air conditioners and vents. Those can develop into problem areas of you do not keep on top of them.

Tools Needed for EPDM RV Leaks Repair

You will generally only need simple tools to repair your trailer roof, according to Best Materials.
• A putty knife is helpful, as is an EPDM roller that helps in rolling in the membrane.
• A good scratch pad will help you in cleaning the roof as you prepare it for repair.
• A razor knife is useful in cutting EPDM rubber.
• Scrapers work well to remove old patching or caulking.
If you have voids on the roof where caulking has come loose, you can re-caulk these areas before you apply your EPDM roofing. You want to eliminate any leaks in the future. The EPDM membrane will help in sealing the roof so that you will not have to worry about RV leaks repair for a long while.