What Is Liquid EPDM and Why Is It Ideal for RV Roof Repairs?

RV owners understand that they have unique maintenance and repair requirements. Owning and maintaining an RV is a lot like caring for a residential home, except that you have the added pressures created by travel. Thankfully, there are products on the market that can make your responsibilities that much simpler. One of those is liquid EPDM, and it is an ideal solution for RV roof repairs. What is liquid EPDM and why should you care?

What’s EPDM All About?

First, let’s discuss what EPDM is and what it is not. It’s an acronym that stands for ethylene propylene diene monomer. Essentially, it is a form of liquid rubber that can be applied to virtually any surface to protect it from further damage, or to repair the existing finish.

Why Is Liquid EPDM Used for RV Roof Repairs?

The most commonly used material for constructing RV roofs is rubber. While both aluminum and fiberglass are used, rubber is more cost effective, lighter, and often better suited to the task. A sheet of rubber is applied over the wood substrate that forms the subroof on your RV, and it’s protected from damaging sunlight, freezing cold, rain, sleet, snow and more.

However, rubber isn’t the perfect solution because it is subject to aging and degradation. Sunlight exposure will dry it out, causing it to become brittle and crack. Heat and cold make it expand and contract, widening those cracks. Eventually, you have cracks large enough to allow water to seep into your roof, where it can cause damage.

Liquid EPDM provides you with a fast way to counter that degradation and damage. A single coating of this liquid rubber formula will seal cracks and prevent water damage, while restoring your RV’s roof to a like-new condition.

The Benefits of Liquid EPDM

While there are plenty of liquid rubber formulations out there, liquid EPDM is unique in that it offers some very specific benefits. One of those is that the material is completely waterproof from the second you apply it. There’s no curing time required to get to that point (although there is a brief curing time required for the material to set completely). That ensures your RV is protected should a rainstorm come up while you’re applying the roof coating, or while it is curing.

Another benefit here is that liquid EPDM can repair roof damage with a single coating. That means you don’t have to spend multiple days rolling liquid rubber over your RV’s roof. One coat, and you’re done.

Next on the list is the fact that liquid EPDM can be applied by hand. All you really need is a roller and a paint pan. It goes on fast, and easy. There’s no need to worry about adding another coat in most instances, and because you can do it yourself by hand, you get a faster, more affordable solution to combatting RV roof damage.

When it comes to repairing your RV’s roof, liquid EPDM is the solution you need – check out RV Liquid Roof to learn more.

Common Roof Repair Questions RV Owners Have

If you own an RV, you love everything that it represents. You can go out and camp across the country when you want, and you never need to worry about paying for a hotel room since you have your room right on your wheels. Of course, you need to make sure you are taking great care of your RV, and this certainly includes the roof. If you have issues with leaks, you probably have some questions. The following are some of the most common roof repair questions from RV owners.

Does Roof Repair Have to Cost a Lot?

When you think about roof repair, you are naturally worried about the cost. The idea of repairing a roof can be intimidating, and you might think it will cost thousands of dollars. Fortunately, unless you have a roof that’s about ready to cave in, you probably will not have to spend too much for the repair. In fact, if you have some leaks and no other real damage to the roof, you will find that the repair is very cheap.

Can I Do the Roof Repair on My Own?

When you have leaks in the roof, there is a good chance that you can take care of the repairs on your own. Many times, all you need to have is some Liquid Roof along with some painter’s tools and a ladder to get up on the roof. This product will add a protective coating to the roof of your RV, and it will keep out the water that has been leaking into the vehicle.

The product goes on very simply. Clean of the roof thoroughly and then apply the Liquid Roof with a roller and paintbrush. Make sure you have a nice and even coat and then let it dry and cure. It can last a long time and keep everything inside the RV nice and dry.

Does Liquid Roof Offer UV Protection?

It does offer UV protection, and that is one of the reasons it can last for so long. No matter what type of weather you might be facing, it will provide you with that additional protection.

How Much Liquid Roof Is Needed?

One of the things you need to keep in mind when you are buying the product for your roof is the size of your RV. Make sure you check the size of your roof and get the proper number of gallons. For example, a trailer between 13’ and 17’ long will use about three gallons. If you have a larger RV that is around 45’ long you will need to have eight gallons for full coverage.

Many times, using Liquid Roof is all you need for your roof repair. However, if you have more problems with your roof, do not hesitate to call in a professional. The sooner you take care of these problems the better. You want your RV to last a long time, and that means you need to take great care of it.

Use Liquid Roof for RV Repairs

Having an RV gives you the freedom to take to the open road and travel the country. You love the idea of being able to take a vacation without needing to book hotel rooms, and then there is the camaraderie of camping and meeting other RV lovers out there. Of course, you need to make sure you take great care of your RV so it stays in good condition for many years. One of the often overlooked spots is the roof, at least until it has a problem and needs to be repaired. Using Liquid Roof for RV repairs can help to patch those leaks, prevent new ones, and provide your RV with a longer life.

Even if your roof doesn’t have any issues currently, using the liquid coating is a good form of preventative maintenance. Although the Liquid Roof for RV repairs is a costlier option than using something such as an acrylic, people are paying for the quality and the longevity that it offers. Once they apply the liquid coating, their roof should remain in good shape for a long time. Unlike the other products used for coating roofs, you will not have to apply this annually. In the end, with the amount of time, effort, and product that you can save using it, it could actually cost less.

Easy to Apply

One of the other benefits of using Liquid Roof for RV repair is how easy it is to apply. You can do it on your own, and it doesn’t take long to do. To make sure the coating applies properly though, you need to do a thorough job of cleaning and washing the roof before you apply it. If there are any elements that you need to replace, such as fasteners, replace those before you add the coating. If there is any rust on the top of the roof, you can remove it with a wire brush. You can also power wash the roof and then let it dry completely. All you need is a paint brush and roller to apply the liquid to your roof. It is fast, simple, and will keep your roof safe.

Continue to Inspect Your Roof

Liquid Roof for RV repairs is an excellent choice when it comes to keeping your RV roof save and in good condition for years to come. However, you should still inspect your roof every year or so, just to be on the lookout for any cracks or potential issues. This will make it much easier for you to catch problems when they are still small enough to repair with less effort and cost.

More Than Just RVs

Even though many people will use this type of coating for RV repairs, it can serve quite a few more purposes as well. You are able to coat many different types of materials such as urethane foam, metal, asphalt, sheet rubber, plywood, and more. It is resistant to the heat and the cold, and is UV and ozone resistant.

Instead of letting your roof fall into disrepair, use Liquid Roof for RV repairs. It is the easy way to keep your roof in great shape.

Why Your Business Needs a Liquid Roof

When you think about the ideal RV for your purposes, a lot of different features probably come to mind. These days, you can have just about anything you want in your recreational vehicle. However, you also have to think about the necessities, too. For example, your RV needs a good, sturdy roof to ensure your fun isn’t cut short because of a leak or draft. Perhaps the best way to do this is actually with a liquid roof.

A Liquid Roof Doesn’t Stay That Way

Let’s cover this topic first before proceeding. When we talk about liquid roofs, we definitely aren’t suggesting that you put a liquid barrier on top of your RV. Instead, we’re talking about EPDM, a specific type of synthetic rubber designed to turn hard once it’s been exposed to air.

This is the real benefit behind the material: you get the ease of applying it as if it were paint. Yet, within an hour or two, the chemical turns into a hard rubber capable of formidable protection. That doesn’t just refer to temperatures and elements, but also the types of wear and tear unique to an RV.

An Affordable Alternative to Traditional Defenses

If you own a recreational vehicle, you may already be aware of some of the common methods owners like you have traditionally used to keep their RV safe and sound from the outside world.

One thing they all have in common, though, is how important they are. It’s not cheap to pay for repairs if something goes wrong with your RV’s roof. On top of that, it could be days—or even weeks—before your roof is back to working again.

A liquid roof couldn’t be easier to install though. As we touched on above, it can be sprayed or rolled out, either option takes a few hours, at most, for even the largest applications. It doesn’t take a fleet of workers you need to pay for either.

Best of all, once the liquid is down, that’s about it. You don’t have to pay for the workers to come back to do touch-ups or handle areas where their materials need to be custom-cut. As it gets applied as a liquid, it can easily accommodate the unique features of your RV too.

Long Lasting Protection

A liquid roof will give your RV unrivaled protection. Another reason to love it, though, is that it will last for decades on end. You don’t have to worry that this is going to be an ongoing process every time you take your RV out of storage or otherwise start using it for the season.

This makes a liquid roof one of the most cost-effective additions to your RV possible. There are definitely all kinds of other ways you could get more from your vehicle, but few will come anywhere near prolonging its life as well as this product can.

Don’t let your RV run into serious trouble because its roof is vulnerable to the elements. Instead, use a liquid EPDM coating to ensure the elements are never able to damage your investment.

Elements of a Great RV Roof Repair Kit

With all of the different elements that an RV has, trying to keep up with them all can be a bit difficult. Most RV owners have a lot on their plate and in some cases this busy schedule will cause them to neglect their RV. Failing to notice things like roofing leaks on an RV can cause a variety of different issues. It is the job of an RV owner to make sure that they address any leakage issues as soon as they are found. Buying the right RV roof repair kit is vital in getting a roof patched and functional again. The following are some of the most essential elements that an RV owner will have to look for in a good roof repair kit.

Comprehensive and Detailed Instructions

For most new RV owners, finding a way to comprehend the complex roof repair process is important. The best way to get the level of understanding needed to repair an RV roof is by choosing a kit that has detailed instructions. A good RV roof repair kit will have a breakdown on how to prep the area all the way to how to mix the liquid rubber sealant.

Without proper direction, it will be nearly impossible for a newcomer to the world of RV roof repair to get the right results. The last thing that an RV owner wants to do is to cause more damage to their roof due to their lack of understanding. If unclear about what the instructions to a kit are saying, the RV owner will need to talk with a professional who can advise them on what to do.

A Quality Liquid Rubber Sealant

Among the most important things that an RV owner has to have when repairing their roof is a quality liquid rubber sealant. Before buying a particular kit, the RV owner will need to take the time to research the brand to find out the quality it is known for. Ideally, the RV owner will want to find a sealant that is both durable and that dries quickly.

Usually, the RV owner will need to pick a nice and sunny day to apply the sealant due to the speedy drying time this can provide. Taking heed of all of the recommendations that the instructions on the RV roof repair kit makes in regards to the conditions that the sealant should be applied in can really help in the overall success of the project.

The Tools Needed For Application

Having a quality sealant will not be worth anything if the RV owner is not able to apply it correctly. A good RV roof repair kit will come with the rollers and tape needed to make the job a success. Having all of the vital tools needed to patch an RV roof leak in one kit is more than worth the money that is paid for it.

Choosing the right experienced supplier to purchase the RV roof repair kit from is important. Researching each of the suppliers is the best way to ensure that the right one is chosen.

Reasons to Apply RV Roof Sealant

For most RV owners, finding a way to keep their vehicle safe and road ready is a top concern. There are a number of things that a person can do to keep their RV in good shape. Among the biggest concerns that the RV owner should have is the roof on their vehicle. The best way to ensure that the roof performs the job it was intended for is by taking the time to apply RV roof sealant. Most RV owners are unaware of just how important this process is until it is too late. An RV owner will have many reasons why they will want to apply this type of sealant and here are a few of them.

Reduce the Strain on the A/C Unit

Just like a home, an RV has an A/C unit that helps to provide the cool air needed to make the inside of the vehicle more comfortable. Over time, the rubber roof on the top of the RV will begin to wear and will start to let some of the cool air that it produced out of the cabin of the RV. This can cause the A/C unit to overwork itself when trying to keep the cabin of the RV at a comfortable temperature.

The best way to reduce the strain that is put on the A/C unit is by using RV roof sealant. This sealant will help to fill the cracks that are in the roof and will allow for the cool air to stay where it is needed. The longer the RV owner waits to get this done, the more of a risk there will be of the A/C unit developing repair issues.

Replacing Damaged Sealant

The next reason why an RV owner will want to reseal their roof is to replace the damaged sealant that is already in place. Over time, the RV roof sealant will begin to break down and cause issues. Rather than waiting until serious issues develop as a result of worn sealant, the RV owner will need to act quickly. The work that they put into reapplying the sealant will more than pay off.

If the RV owner is unsure about how to reapply the sealant, then they will need to talk with a professional to get some help. The professionals will be able to offer recommendations to the RV owner regarding what type of sealant to use.

Fixing Holes or Tears in the Roofing

If the RV owner begins to notice that there are tears or rips in their rubber roofing, then they will need to get some sealant. By using specially designed tape, the owner will be able to go over the tear and then cover the tape with RV roof sealant.

The benefits that using RV roof sealant are undeniable and a major reason why the RV owner needs to ensure their roof is sealed properly. Getting high-quality sealant is the best way to get the results needed to fix a leaky roof.

Why Liquid Roof Repair Is the Way to Go

Roofs have a very specific, though sometimes underappreciated job. However, when a roof stops serving that purpose, it becomes extremely obvious that something isn’t right. If your roof has sprung a leak, the first thing you’re probably thinking about is getting it fixed immediately. However, if you don’t handle this job the right way, you’ll be worse off than when you started.

It’s Quick

When you have a leak in your roof, you want it fixed immediately. The longer you let it go, the more damage that could occur, some of which might be extremely expensive. Fortunately, EPDM makes roof repair jobs about as fast as they could possibly be. All you have to do is clean the area and make sure you know the extent of the damage caused by the leak. Then cover it in EPDM spray or roll it out over it and you’re good to go.

Many of you may still want to hire a professional though. For one thing, it can be dangerous trying to work on a roof if you’re not accustomed to doing so. Still, the job should go by quickly, meaning you won’t be inconvenienced for long.

EPDM Is Affordable

Despite how much it can do, EPDM won’t be too hard on your budget. This is an extremely cheap product no matter which version you decide to use. Obviously, this is good news if you have a fairly big leak to fix or a number of them. However, it should also make you happy knowing that if you do have to hire someone, the cost of EPDM won’t hurt too much. In fact, when you consider how quickly it can be applied, labor costs shouldn’t be much either.

The Effects Last for Years

Given how quickly EPDM can be applied and how fast it dries, you could be forgiven for thinking that this liquid rubber was some type of temporary solution until there was time to truly fix the leak.

You’d be wrong though. EPDM isn’t just for roof repair jobs. People use it for covering their entire roofs. This includes commercial and industrial businesses, as well as RVs. That’s because EPDM is such a cost-effective and efficient solution.

Over and over again, this liquid rubber has proven it can withstand abuse from the elements for over 20 years! Therefore, although it’s definitely a good choice for fixing your leak, you may also want to consider how it could protect your entire roof.

Amongst other things, EPDM has been tested in the most extreme of temperatures and shown it can’t be compromised. Whether it’s 40 degrees below Fahrenheit or 300 above, the rubber will hold up. Chances are your repair job will never have to face down this type of challenge, but it’s still nice knowing that come what may, you won’t get another leak any time soon.

If you should ever be so unlucky as to suffer from a leak in your roof, make sure you use EPDM rubber to seal it back up. You’ll be glad you did for all of the above reasons and then some.

How to Repair a Roof with an EPDM Coating

If you were looking for a roofing solution for your RVs, it makes sense that you may have chosen EPDM. This material is second-to-none when it comes to protecting your roof against whatever the outside world may throw at it. That being said, eventually it may need a repair or two. Decades of torment are bound to do damage or Mother Nature may just land a lucky blow. In either case, you can handle the repair with EPDM coating and get right back to enjoying a well-protected roof.

Check the Weather

Don’t start this project until weather conditions are in your favor. You can have the whole thing done in a day, but only if the temperature is 40 degrees Fahrenheit or higher. It can be tempting to try this when the temperature is nice and low so you’re not baking on top of that roof, but your primer will likely freeze or otherwise not adhere to the EPDM very well.

Clean the Surface

Before you can repair your roof, it needs to be as clean as possible. If you’re replacing the EPDM coating on the entire thing, then your whole roof needs to be cleaned off. Otherwise, just clean the specific area you’re addressing.

However, it can’t be stressed enough that the area you’re planning to repair has to all-but-sparkle. That’s because no matter how you plan on installing the new layer of EPDM, anything that stands between it and your roof is liable to cause a problem, which could leave you needing to handle repairs again later.

This also means addressing any damage that was done to your roof. Remove any pieces of wood, concrete, etc. that may be loose. Caulk or otherwise seal up any holes. You want as smooth a surface as possible below your EPDM coating.

Apply Your Primer

No matter what you’re using to handle the repair with EPDM coating, you’re going to have to lay down a primer first. A simple paintbrush is usually perfect for the job as it ensures you get the primer all over the area, as opposed to using a spray, which can miss certain spots.

However, you also want to make sure you spread it nice and evenly. Puddles of primer don’t dry all the way through and will cause problems when you try applying EPDM to it.

Usually, primer should take two or three minutes to dry, depending on your weather.

Apply Your EPDM

If you’re just repairing a single patch, make sure the piece of EPDM you cut goes about two to three inches past it in every direction. Always be sure when you apply it, that no air bubbles get trapped below. Then use a silicone roller to force it into your primer. You only need a moderate amount of pressure to do this successfully.

That’s’ all it takes to repair your EPDM roof. While these roofs are very strong to begin with, repairs will eventually become necessary. One of the benefits of this kind of roofing, though, is that handling the repair is so easy.

How to Prepare for an RV Roof Repair with EPDM

Having an RV can be lot of fun and can lead to a number of unforgettable experiences. Unfortunately, one such experience may occur if the RV springs a leak. Aside from putting plans you may have for your RV on hold, a leak can also cause a lot of damage. If water gets in and messes with your electrical, you’ll be looking at a long hiatus from your RV and some pretty expensive repairs. That’s why it pays to repair your roof with EPDM. This rubber will help ensure you aren’t doing repairs again anytime soon. Here’s what you’ll need, aside from the rubber, to complete the job.

The Roller

This tool is critical for RV roof repair or basically anytime you’re rolling out EPDM. If you decide to go with EPDM liquid roof RV repair, you’ll still need a roller, so this tool works either way. However, the actual “roller” attachment will differ.

Surface Conditioning Pad (Very-Fine Grade)

There are a number of ways to describe this material, but basically, you’re looking for a heavy-duty sandpaper you can use for cleaning the roof of your RV. This is essential before attempting RV roof repair because you’ll need some kind of bonding agent to adhere the EPDM to the roof and anything that gets in the way—whether it’s dust or debris—will cause issues. Paper towels and household cleaner won’t do; you need that surface looking immaculate, like you just bought it.

Razor Knife or Shears

Unless you decided on liquid roof RV repair, you’re going to need some type of tool for cutting the rubber into the appropriate size for your vehicle. Use either a razor knife or some kind of shears, but keep in mind that simple scissors won’t do the job. When working with EPDM membranes, it’s vital that you keep rough or jagged edges to a minimum.

Scrape

You’re also going to need a tool of some sort to help get rid of excess caulking you no longer need. Utility blades work well for this job or simple scrapers can be used.

Choosing Your EPDM

As we mentioned above, you can go with a liquid or rubber membrane application for your RV. You don’t necessarily need to look for a brand that was made specifically for RVs either. EPDM works the same no matter what the structure below it is.

Preparing Your RV

RV roof repair cannot begin until you’ve cleaned off the entire area. Unless you’ve applied EPDM before and are just patching up an area that’s been compromised, (in which case, that area still needs to be cleaned), it’s time to get some elbow grease going.

Begin by removing any obvious issues like grease, water, foliage, or other forms of debris. The same goes for any leftover chemicals or materials that may have once been a part of the roofing. Use a non-silicone caulk to seal up any holes in your RV’s roof and then go over the whole surface with the conditioning pad of your choice.

Once you’ve done all this, you’re ready to begin applying your EDM and repairing your RV’s roof.

Why and How to Apply Elastomeric Coatings

To keep your home insulated and dry, you need a roof you can depend on. Even the best roofs can have their issues though. When this happens you want it fixed and fixed fast. One of the best solutions available is an elastomeric coating. Read on to discover why it’s so great and how to apply it.

Benefits of Elastomeric Coatings

One of the main benefits of using an elastometric coating is its durability. Once applied, the coating can easily last over twenty years. Its elasticity and impenetrability will make sure nothing sneaks through your roof that entire time.

While you can choose from an array of colors, the white coatings will also help bounce the sun’s rays off it and away from your building. This is a very cheap way of keeping your building cool during the summer months.

Depending on the professional you hire or if you can do it yourself, Elastomeric coatings are also quite cheap compared to the alternative of replacing a whole roof or even just large sections.

Applying Elastomeric Coatings to Your Roof

Keep in mind that while elastomeric coatings are user friendly, it’s best that that user has some kind of experience either as a contractor or in home repair. You’ll only be creating a bigger, more expensive project if you don’t take care with your coating the first time. Also, keep in mind the kind of roof you have will affect the difficulty. Roofs made with foam or gravel and those that reside over cathedral ceilings will all make things much more difficult.

Start by thoroughly cleaning off your roof. Anything you coat over, you’re stuck with. So take care to clear any and all debris. Use a professional solution made for roofs as there will be all kinds of oils and pollutants you’ll want to wash off that are invisible to the naked eye.

At this time, you might also notice certain holes or cracks in your roof. This is another job for a professional product like a roof sealant or plaster.

Once the roof is dry from any cleaning or repairs, you can begin applying your product. Elastomeric coatings are best applied with paint rollers and you’ll want to use an extension rod, so you’re not constantly bending over. For areas that are hard to hit with a roller, use a standard paint brush.

Try to get 100 sq. feet from every gallon of coating you have. You can achieve this result with either one thick or two thinner coats, whichever is easier for you. If you do two, however, be sure the original one dries before reapplying.