Making repairs of any kind can be daunting. This is especially true when you have to make repairs to the roof of your RV, which is, for all intents and purposes, your home. But, there’s no reason to despond if your RV roof has sprung a leak. In fact, you’ll find that it’s easy to make liquid roof repairs with EPDM coating!
What Is Liquid Roof?
Liquid roof is pretty much what it sounds like. It’s made from the very same polymers that make up EPDM, which stands for Ethylene Propylene Diene Terpolymer. Unlike EPDM roofing, however, which is applied in sheets, liquid roof is applied as a liquid that takes a very short time to set. Because it comes in this liquid form, you’ll find that it is relatively easy to transport and apply, which makes it an ideal solution for making repairs to the roof of your RV.
Applying Liquid Roof to Your RV
You’re going to find that doing liquid roof RV repairs is a relatively simple and painless process. All that you’re going to need is a few tools, the liquid roof, and some spare time. As far as tools are concerned, you’ll likely need to following:
- Cleaning Products: You’ll need these in order to make sure your roof is squeaky clean before you make the repairs.
- EPDM Roller: You’re going to use this to apply the liquid roof to your RV.
- Masking Tape: This is optional, but you may find it useful if you need to protect certain parts of your RV’s roof from getting covered with the liquid roof.
Once you have these products, making the repairs is going to be a cinch. First, make sure that you have a clear day when precipitation is not expected. The air temperature won’t be much of a factor, unless, of course, you’re trying to make the repairs in extremely cold weather. But, who would do that?
The first step that you’ll need to take is cleaning your RV’s roof. Make sure that the entire roof is clear of any debris, and also that you’ve rid it of dirt and grime as best as possible. This is extremely important, as the liquid roof will need to bond directly with the EPDM RV roof that you already have in place, and any impurities that stand between the liquid roof and the RV’s roof will degrade the liquid roofs ability to form a cohesive bond.
After the roof is cleaned, you’ll need to apply the liquid roof. You can do this by using the EPDM roller to spread the liquid roof as evenly as possible across any trouble areas. It’s important, too, that you spread as even as possible, as letting the liquid roof bunch up in any particular area will seriously jeopardize the effectiveness of the repairs you’re making.
Once the liquid roof has been applied successfully, you’re pretty much in the clear. Give the liquid roof around 24 hours to set, and after that you’ll be good to hit the open road again!